DUCTS
DUCTOS
If you need information about other products not listed, contact us at
FIBER-DUCT System Fittings
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|||
| ||||||||||||
- Larg capacity 2"x2" and 4"x4" sizes
- 4 color choices: Black, Light
Gray, Orange and Clear
- Available in ABS or Polycarbonate
material
- Routes Fiber Optic, Category
5 UTP, ScTP and Coax
cables
- Compatible with PAN-NET Network
Cabling System
- Provides a totally integrated
strctured cabling solution
FIBER-DUCT Wiring Duct Routing System provides a complete solution for routing and protecting your fiber optic cables. This system can also be used for Category 5 UTP, ScTP and Coax cabling applications as well. The fittings are specially designed to maintain a minimun 2" cable bend radius which protects against signal loss due to excessive bending of cables. Afull selection of fittings is available to speed your installation.
PANDUCT Types E and S
PANDUCT Wiring Duct, when used with the new FIBER-DUCT Routing System, provides a complete solution for routing and protecting your fiber optic cables. Both soltted and solid wall wiring duct are available to match your application requirements. Smooth, rounded edges protect cables and hands from abrasion. Both versions accept the same non-slip, snap-on cover.
FIBER-DUCT Mounting Brarckets
MOUNTING BRACKETS A complete selection of mounting brackets is available for use with the new FIBER-DUCT Routing System.They can be used in conjunction with existing ladder racks or in applications suspended from the ceiling. The mounting brackets and hadware can also be used in under-floor applications.
Type LDP for Powew or Communications
Cabling including Fiber Optic Cables
Type LD and CD for Communications Cabling including
Fiber Optic Cables
PAN-WAY Type LDP
- Tamper resistant latch desing
- Non metallic, lightweight PVC
- 5 decorator colors
- Excellent for Category 5 and fiber optic cabling applications
- Pre-applied adhesive speeds installation on clean, smooth
interior surfaces
PAN-WAY Type LDP Surface Raceway is U.L. Listed to 600V yet can also be used for routing low voltage communication cabling including fiber optic cables. It provides superior tamper resistance making it ideal for school and university applications. The one piece, hinged cover design allows cables to be laid in, not fished through and also provides exceptional strength during impact and cutting. Fittings incorporate a minimum 1" bend radius which makes them ideal for use in Category 5 UTP and Fiber Optic cabling applications.
PAN-WAY Type LD
PAN-WAY Type LD Surface Raceway is an adhesive-backed, one-piece raceway that installs quickly and easily. The superior one piece, hinged cover design holds cables to be laid in, instead of fished through the raceway. The integral hinge willnot separate when the raceway is cut or impacted. Fittings incorporate a minimum 1" bend radius which makes them ideal for use in Category 5 UTP and Fiber Optic cabling applications.
PAN-WAY Type CD
PAN-WAY Type CD Surface Raceway system is a two piece design and consists of a cover which snaps onto a choice of adhesive-backed or screw mounted bases. It is used to route low voltage communication cabling on irregular interior surfaces such as masonry. Fittings incorporate a minimum 1" bend radius whichmakes them ideal for use in Category 5 UTP and Fiber Optic cabling applications
PAN-WAY Types LDP, LD and CD
Additional Product Features:
- Unique fitting design maintains a 1" cable bend
radius when cables are
laid in or pulled through, regardless of
raceway fill- Aggressive latching
design holds fittings securely to the raceway
- Same fittings can be used wiht Types LDP,LD and
CD Raceways
- Fittings snap easily into place to speed entire
raceway installation
- Fittings eliminate need for mitering
Data transmission performance of both Category 5 cables and optical fibers can be degraded when they are bent excessively
The new PAN-WAY Raceway Fittings for Types LDP, Ld and CD raceways are TIA/EIA compliant. These fittings are designed to maintain a minimum 1" cable bend radius which protects optical fiber cabling and prevents Category 5 cales from exceeding their 1" minimum bend radius as recommended in TIA/EIA-568A.
The PAN-WAY Raceway System when used with the PAN-NET Network Cabling System, provides you connectivity requirements from the telecommunications closet to the workstation outlet.
PAN-WAY Types LDP,
LD and CD
Junction Boxes
PAN-WAY low voltage junction boxes are used in surface mounted network cabling applications. They are designed for use with PAN-WAY Types LDP,LD CD and PD raceways. A "Deep" version provides additional cable capacity and is ideal for helping to maintain the minimum bend radius requirements of CATEGORY 5 AND fiber Optic cables. Boxes are available in a variety of styles and can be mounted with screws (user supplied) or optional adhesive or magnetic backing.
Type T for Powew and Communications Cabling including Fiber Optic Cables
Refer to back cover for information regarding the complete line of Panduit Structured Cabling Products.
Surface Raceway
PAN-WAY Type T Surface Raceway is a large capacity, multi-channel system. It allows you to route both power and low voltage communication cables together in one raceway. Type T Raceway features superior tamper resistance which makes it ideal for school and university applications. However, cables are accessible for future revisions. A complete selection of fittings and accessories is available to speed installation.
Raceway Accessories
Divider Wall
- Divider Wall can be used with all three sizes of raceway
Mounting Bracket
- Speeds mounting of raceway
- Bracket is hidden from view once base is mounted
Wire Retainer
- Unique design supports wire and cable weight even
when raceway is mounted in inverted fashion
Fittings
Coupler Fittings
- Covers seam between sections fo raceway
Inside Corner Fitting
- Use to mount raceway at 90º inside corners
Right Angle Fitting
- Used to mount raceway at 90º flat junctions.
Outside Corner Fitting
- Use to mount raceway at 90º outside corners
Tee Fitting
- Used mount raceway at tee intersections
End Cap Fitting
- For closing off the ends fo the raceway base
- Includes concentric breakouts for 1/2"and 3/4" conduit
Molded Covers
- Improves
easthetic appearance of raceway
- Tamper resistant
- Works with standard NEMA electrical
devices
- Available in 4 decorator colors
to match the raceway
- Available in six configurations
to match your application
requirements
Type T130 Molded Covers eliminated the need for electrical faceplates and pre-punched covers. They allow electrical devices to be mounted side-by-side with communication devices. Type T130 Molded Covers are designed to help speed your installation and lower your installed cost.
Box and Pre-Cut Covers
Type T Boxes and pre-cut Covers provide an alternative method for mounting electrical and communication devices to Type T Raceway. They allow for flush mounting of the devices in the raceway an they work with all three sizes of Type T Raceway. Pre-cut covers enable you to mount up to six cummunications devices side-by-side. Additinally, they allow you to mount other MINI-COM and MOD-COM Devices such as the new Sloped Faceplate and low profile, Surface Mount Boxes.
If you require more information as: different type of conductors, costos of any of this products, please send your requirements filling the frame underneath and it will be forwarded to you same way.
Si Ud. requiere mayor información
como ser: características de los diferentes dúctos, otro tipo,
y costos sobre cualquiera de estos productos le rogamos enviar
sus requerimientos en el cuadro que esta al pie de esta página
y le será remitido a vuelta de correo.